Double Glazed Window Repair
It is worth looking into the warranty that comes with most double-glazed windows. Generally, it includes any issues with the hardware of the window such as hinges and locking mechanisms - within the first 10 years.
Mist between the glass windows can be caused by a breach in the seal and needs to be repaired quickly to prevent mould or damp developing in your property.
Condensation Between the Windows
If condensation forms between windows in your home, it is an indicator that the seal holding the gas that is used to insulate between the panes has failed. This is a serious issue that should be addressed as soon as possible particularly in winter, when humidity is at its highest. It could also lead to damage around the sills and sealant, or even mildew or mould.
Double-glazed windows shouldn't have condensation between the panes. This problem is often caused by high humidity or a very cold snap. Fortunately, it is repairable without having to replace the entire window. A professional can drill tiny holes into the window and spray special cleaning solution inside. The moisture is then removed from the window. Additionally, an anti-fogger is fitted to prevent the accumulation of moisture from happening again.
Condensation can also occur between the windows as a result of air leakage, or other factors outside the window. In this scenario it can take a longer time for moisture in the window to build up, since the air must be sufficiently warm to evaporate the water molecules. In these situations it is more beneficial to replace double-glazed windows rather than trying to repair the sealed units.
A double-glazed glass window is comprised of two or more pieces of tempered, insulated glass, which are joined by a metal frame. The gap between the two windows is filled with an insulating gas such as Krypton or argon, and then sealed. The seal blocks the gases that are insulating from escape and also blocks moisture and air from entering the gap.
As the windows age, the seals get worse and allow moisture to leak into the gap between the glass panes. It is crucial to recognize when the seals are leaking, as it means that the double glazing isn't functioning as efficiently as it once was. This can result in poor energy efficiency, increased heating bills, damaged property, and the possibility of condensation between the windows.
Mist
It is perfectly normal to observe condensation on your windows. This means that your double glazing system is functioning well and is able to keep heat in your house. The condensation forms because the outside air is more warm than the glass and reaches its dew point before the window. Double glazing of high quality is an excellent way to accomplish this.
If you see condensation on the inside of the window, it could be a sign of an issue with ventilation in your home. The moisture that is accumulating can't be absorbed and end in the window, carpets furniture, and other areas of your home. upvc window repair near me is recommended to have this checked by a professional and making sure that there plenty of fresh air flowing through the house will help to prevent it in the future.
Another reason why you may get mist on your double-glazed window is that the seal between the two panes has broken down. This can be due to wear and tear or chemical cleaning products being used. If this occurs, the best option is to repair the windows in the shortest time possible.
The professional repair of your windows will ensure that they remain dry and free of condensation, fogging and misting. This is also much cheaper than replacing your windows and you will save money on your energy bills.
A FENSA-registered window installer can give you a quote to repair or replace your double glazed Windows. If your windows are quite old and have been used for a long time you might want to consider changing them to new A-rated energy efficient windows.
It is a good idea to keep copies of any warranties and agreements with your window fitting company. It will be useful if you experience any problems with your windows. You can contact your window fitters and work out the issue. This is better than ignoring the issue, which could lead to further problems in your home.
Close or open with difficulty
If double-glazed windows are difficult to open and close it isn't just annoying and can result in higher energy bills because of the loss of heat and draughts. It can also pose a security risk, especially when the locks aren't functioning properly. It is important to repair double-glazed doors and windows as soon as possible.
If you've tried to open your window using the simplest methods, like using a screwdriver or tapping the frame with a solid object, the issue could be more serious. It could be that the window is sagging within its frame and requires to be re-set or it could be that there is a gap between the glass panes and the frames. In either case, you should contact a professional double glazing repair expert to ensure that the proper repairs are done and to prevent any further problems.
It's not common for UPVC window handles and lock mechanisms to become difficult to operate or stuck particularly when they're old and worn. This is caused by an accumulation of grease or dirt inside the handle and can often be solved by cleaning it with a uPVC cleaner. If this doesn't work then you could try gently tapping the uPVC frame with a sharp object like a screwdriver, taking care not to harm the handle or the mechanism for window handles.
If this doesn't solve the problem, the window will need to be replaced as the hinges may no longer be in the correct position or the locking mechanism may have been damaged. In this instance, you must consult a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glass window. He has vast experience the conversion of old window mechanisms into modern ones. This will often reduce the cost of replacing the entire window. Contact us today for more information or a no-cost quote.
Warping
Double-glazed windows are typically an excellent option to save energy in the home. They consist of two panes that have a spacer, or dense gas between them. This creates a seal which keeps cold air out and warm within. However, over time, the windows may be damaged or broken and require repair. Most repairs can be done without replacing the entire window.
Warping is a common problem with double-glazed windows. This happens when the windows begin to bow, twist or bow. This can impact the structural integrity and insulation capabilities of the window. The best method to avoid this problem is to ensure that your double glazed windows are properly installed and maintained regularly.
Contact a specialist immediately if you notice that your double-glazed windows are sagging. This will help to keep the issue from getting worse. They will be able to inspect your windows and determine the cause of the warping. They will use special tools to correct your problem and ensure that you windows are completely sealed.
Water vapour can trigger this issue, since it can build up between the windows over time. This could be due to many factors, such as weather conditions, humidity levels and temperature variations. To address this issue the expert will drill out a small hole to release moisture. The specialist will apply a cleaning agent on the glass to cleanse it, then apply sealant.
If your windows cannot be closed or opened it could be due to a malfunctioning mechanism or hinges. Before calling a professional to fix the issue, it's recommended to lubricate these parts. This will usually resolve the issue and decrease your need for replacements. However, if your windows are very old or are not providing the insulation you would like to see, it is often better to replace them.
